top of page
We are your full-service crown and bridge lab!
----------------------- From single units and implants to full-mouth restorations ---------------------
We are excited to offer our dentists the leading edge in digital impression technology!
------ The Primescan by Dentsply Sirona ------
Watch this video by Dr. James Klim, DDS to learn more about the Omnicam features & benefits!
Pick-up & Delivery Service
  • Free pickup & delivery offered for College Station, Bryan, Spring, Conroe, The Woodlands, Bellville, Navasota, and surrounding areas
  • Free Return Shipping (for dentists outside local area)
Crown & Bridge
  • Zirconia/Full Z/Bruxzir (we can return crown any day you need it)
  • e.Max  (we can return crown any day you need it)
  • Porcelain-fused-to-metal (PFM) (14 days)
  • Precious metal (14 days)
Implants & Custom Abutments
  • Zirconia/Full Z/Bruxzir  (we can return crown any day you need it)
  • e.Max  (we can return crown any day you need it)
  • Titanium*
  • Zirconia custom implant abutment milled in our lab with crown as well (we can return crown any day you need it)
  • Zirconia/Full Z/Bruxzir  (we can return crown any day you need it)
*Titanium implants & abutments are not milled in-house (yet!) and require an additional 7-10 days
Your Benefits:
  • Primescan digital impression system at your practice provided by Jarvis Dental Lab
  • Staff training & continued support
  • No ownership hassle (initial investment, depreciation, obsolete equipment, etc.)  
  • No term use contract (i.e., if you use it for a week or a month or a year and decide it's not for you, no problem)
  • Increased efficiency (saves chair time)
  • Eliminate cost of impression putty/tray
  • Increased patient comfort
  • Increased Impression accuracy = better fitting crowns!
Our Benefits:
  • All work done through Primescan sent to our lab for design & fabrication
  • Average 30+ crowns / month
    • On average, we understand how volume can vary and that's ok
    • We also understand the first month's volume may be slightly lower as the dentist and staff incorporate all the benefits of the Omnicam into thier practice
  • Elimination of model pour-up
  • Increased impression accuracy = better fitting crowns!

Material Descriptions

Zirconia/Full Z/ BruxZir

Zirconia, Zirconium oxide (ZrO2), is the next generation of the ceramic materials. Zirconia is comprised of presintered zirconium oxide which is milled in the soft state and then sintered overnight. Zirconia is the top-of-the-line dental restoration material. No other restorations can match Zirconia in strength, fit, aesthetic appearance, biocompatibility, comfort, and durability.

Zirconia restorations are comparable with the human body in that they contain no metal.  With zirconia, you can replace your less durable all porcelain and old fashioned porcelain fused to metal (noble, or high noble). Zirconia restoration has been around more than 10 years and has been greatly improved over the years.


  • Steel like strength (3-point flexural strength is approx. 1150 MPa)
  • Superior Aesthetic Appearance
  • Biocompatibility
  • Low thermal conductivity


  • Anterior and posterior crowns
  • Anterior and posterior bridges


IPS e.max lithium disilicate brings a new level of confidence to dentistry. With high esthetics and high strength, we now have the best of both world. IPS e.max lithium disilicate can be used for a wide range of applications, including: anterior/posterior crowns, inlays/onlay, and veneers.

Dental professionals are often faced with challenging cases that require the dentist and the technician to balance both strength and esthetic demands requiring multiple substructures and multiple systems. As a result, it is difficult to fabricate restorations and create a life-like smile with consistent vitality. IPS e.max offers a balance of versatility and simplicity, which means you can be confident when restoring, even the most complex cases.


  • High Strength Ceramic Material (flexural strength at 360-400 MPa)

  • Superior Aesthetic Appearance

  • Biocompatibility

  • High Translucency


  • Anterior and posterior crowns

  • Inlays/Onlays

  • Veneers

  • Thin Veneers


  • Custom abutments and implants

    • offered in titanium, e.max, and zirconia

  • Custom Zirconia abutments and implants are milled in-house, same day with crown available - call 936-825-8008 for details!



We use SHOFU Vintage Porcelain, one of the finest porcelains on the market.  Vintage Esthetic Porcelain was developed for the efficient and cost-effective production of high-quality aesthetic restorations. The Vintage porcelain system is compatible with all common ceramic alloys with a CTE range of 13.6-15.0 x 10-6 (25ºC-500ºC). Developed according to the VITA Classical Color System it is compatible with the reasonable non-precious ceramic alloys besides the usual ceramic alloys. The Vintage body and incisal powders feature a fluorescence identical to natural teeth and are extremely stable in color even after several firings.


  • Harmoniously coordinated individual components in the range of the Vita Classical Color System
  • Abrasion values close to those of natural tooth enamel
  • High color accuracy even in thin layers
  • A system for metal and all porcelain by adding the Lamina Porcelain System
  • The particle size of Vintage Opal porcelain corresponds to the structure of natural tooth enamel and has allowed opalescent enamel contents for the first time
  • Natural opalescence and fluorescence
  • Controllable variation in the brightness value in the dentine region by Value Plus components


  • Anterior/Posterior Crowns
  • Multiple Unit Bridges


Precious & non-precious metal crowns digitally designed and milled for unparalleled precision


  • fit to Partial

  • Porcelain shoulder margin

  • Soft gingival tissue

  • Pink porcelain tissue

  • Diagnostic wax up (milled)

bottom of page